Industrial Oils

- wide range of oils and greases for various industrial applications
- hydraulic oils for light and special applications, gear oils
- calcium and lithium based greases, complex greases with EP additives based on graphite and / or molybdenum disulfide soaps



Products:

LUBEX HLP SERIES

LUBEX HLP Series are economic, HLP type hydraulic system, gearbox and lubricating oils which have been produced by blending high quality mineral oils with exclusive additives.

LUBEX HLP Series are designed for systems in which resistance against wear and film layer formation is required. They are also suitable for systems where no wear is present and loading capacity is low.

Applications:

LUBEX HLP Series are especially recommended for industrial and dynamic hydraulic systems which do not work under extreme pressure conditions.

Advantages:

-They are long-term oils which are resistant to oxidation due to the antioxidant additives they contain
-Do not cause corrosion even if condensate water enters the system
-Works fine in an environment with very little water due to water separability properties, easily separates from water in large quantities
-Do not plug the filters thus prolongs filter life
-Decreases oil change frequency, thus provides prolonged oil and equipment life, reduces waste disposal costs to a minimum
-Preserves their performance characteristics even under though working conditions
-Does not foam due to the antifoam additives unless there are mechanical problems in the system, prevents cavitations in the pumps
-Keeps the system clean due to cleaning and sediment drag properties, prevents sludge formation.

Available products for Lubex HLP Series: HLP-32, HLP-37, HLP-46, HLP-68.

Specifications\Approvals:

DIN 51524 Part II (HLP)
SO 11158 HM,
US STEEL 126/127,
AFNOR N FE 48603
EATON (VICKERS) I-286-S,
EATON (VICKERS) M-2950-S

 



LUBEX HLP SERIES.PDS.pdf
RECOMPOUND SERIES

RECOMPOUND Series oils are special closed system gear oils that can work under
heavy loads. They contain EP additives to minimize the wear and other additives
against oxidation and foam formation.
RECOMPOUND Series do not affect the sealing and protect gears rusting and corrosion even if there is water in the system.
RECOMPOUND Series prevent deposits formation due to its special antioxidants and provide elongated service life thanks to its resistance to oxidation.
Performance:
AGMA 250.04
US STEEL 224
Kinematic Viscosity (40°C, cSt): from VG 46 to VG 1000



1RECOMPOUND.pdf
BELGEAR HYPOID SERIES

BELGEAR HYPOID Series; high performance gear oils for automotive transmission,
differential boxes and rear axles.
BELGEAR HYPOID Series protect components through a wide temperature range.
BELGEAR HYPOID Series are suitable for all applications where EP gear oil with limited
slip performance is required.
There are 3 types of product: SAE 80W90, 85W90, 85W140.
Performance level :
API GL-5
MIL L –2105 D



BELGEAR HYPOID SERIES.PDS.pdf
BELGEAR EP SERIES

BELGEAR EP Series are gear oils which are produced with paraffinic base oils blended with anticorrosion and anti-wear additives and are designed for the utilization of differential, gearbox and hypoid gears under medium conditions.

Application:

BELGEAR EP Series are utilized in trucks, buses, automobiles and caterpillars which operate under high velocity-low torque, low velocity-high torque conditions.

They are used in manual transmissions and drive axles requiring API GL-4 level performance, passenger cars, heavy-duty trucks and commercial vehicles and other industrial, commercial, and automotive applications.

Advantages:

-Reduce wear, thus increase the equipment performance by increasing production capacity
-Decrease oil change frequency, thus provide prolonged oil and equipment life; reduce waste disposal costs to a minimum
-Reduce maintenance needs and increase the reliability of gearbox by reducing the oil leaks, oil consumption and pollution
-Their performance characteristics do not change even under severe operating conditions
-Provide long-term oil and equipment life by prolonging oil and oil filter change intervals
-Do not foam due to the antifoam additives unless there are mechanical problems in the system, prevent cavitations in the pumps
-Have wide application area

Available products for Belgear EP Series: SAE 80, 90, 140.

Specification / Approvals :

API GL-4



BELGEAR EP SERIES.PDS.pdf
BELGEAR SERIES

BELGEAR SERIES are gear oils produced with paraffinic base oils blended with anti-corrosion additives and are designed for the utilization of differential, gearbox and hypoid gears under medium conditions.

BELGEAR SERIES are utilized in trucks, buses, automobiles and construction equipment which operate under high velocity torque, low velocity-high torque conditions.

Available products for Belgear Series: SAE 80, 90, 140.

SPECIFICATION/APPROVALS:

API GL-1



BELGEAR SERIES.PDS.pdf
GRESON CG SERIES

GRESON CG Series are calcium soap based, black colored grease which contain graphite. They can be used for processes exposed to water and worked under low temperature, low speed and medium loads.
Application:
They are especially used for the service bearings exposed to water and worked under low
temperatures and low speeds.
Advantages:
-Thanks to the support of graphite, provides superior protection and longer service life,
-Thanks to graphite content, it provides emergency lubrication,
-Has high water resistance, so that they can perform long-time lubrication without being
washed away with water,
-Has excellent load-carrying capacity,
-Provides a good equipment protection and lubrication due to its superior protective
properties against corrosion and oxidation,
-Cost effective in grease consumption due to their excellent lubrication properties,
-Long-life products due to their high oxidation resistance.
Available products and NLGI grades: CG-1, CG-2, CG-3, NLGI 1, 2 and 3.



GRESON CG SERIES.PDS.pdf
GRESON LIT-G SERIES

GRESON LIT-G GREASES are lithium soap based, black colored multipurpose, greases containing graphite. These greases provide excellent protection against water, oxidation, rust and corrosion.
Application:
They are used in medium loading bearings, vertical shaft applications, electrical motors and also in automotive applications for operating temperature between -20ºC and 130ºC.
Advantages:
-They provide long-life protection for vehicles due to their high thermal stability and wear
preventive properties,
-They provide a good equipment protection and lubrication due to their superior protective properties against corrosion and oxidation,
-They have high water resistance, so that they can perform long-time lubrication without being washed away with water,
-They are cost effective in Grease consumption due to their excellent lubrication properties,
-They are long-life products due to their high oxidation resistance.
Available NLGI grades: 000, 00, 0, 1, 2 and 3.



GRESON L_-T-G GREASES.PDS.pdf
GRESON LIT-M GREASES

GRESON LIT-M GREASES are lithium soap based, gray-black colored multipurpose greases. These greases provide excellent protection against water, oxidation, rust and corrosion. The lubricity and film forming effect is improved with solid lubricants like molybdenum disulfide and additionally EP additives.
Application:
They are used in bearings, vertical shaft applications, electrical motors and also in automotive applications under extreme conditions.
The recommended operating temperature range is from -20ºC and 130ºC.
Advantages:
-They provide long-life protection for vehicles due to their high thermal stability and wear
preventive properties,
-They provide a good equipment protection and lubrication due to their superior protective properties against corrosion and oxidation,
-They have high water resistance, so that they can perform long-time lubrication without being washed away with water,
-They are cost effective in Grease consumption due to their excellent lubrication properties,
-They are long-life products due to their high oxidation resistance.
Available NLGI grades: 1, 2 and 3.



GRESON L_-T-M GREASES.PDS.pdf
GRESON LIT EP GREASES

GRESON LIT EP GREASES, are lithium soap greases blended with mineral oils and enriched with extreme pressure additives. They are long-life multipurpose industrial greases, that are resistant to water, corrosion and oxidation.

GRESON LIT EP GREASES, can be used in medium and high loading bearings, vertical shaft applications, electrical motors and also in automotive applications.

Available NLGI grades: 000, 00, 0, 1, 2 and 3.



GRESON LIT EP GREASES.PDS.pdf
GRESON LIT GREASES

GRESON LIT GREASES are long-life, multi purpose, lithium soap based greases which are resistant to wash-out, oxidation and corrosion.

Application:

They are recommended for multi-type industrial applications such as medium bearings, every type of shear surfaces, vertical shaft applications, electrical motors, lubrication of automotive equipments.

The temperature of usage is between -20ºC and 130ºC.

Advantages:

-They provide long-life protection for vehicles due to their high thermal stability and wear preventive properties,
-They provide a good equipment protection and lubrication due to their superior protective properties against corrosion and oxidation,
-They have high water resistance, so that they can perform long-time lubrication without being washed away with water,
-They are cost effective in Grease consumption due to their excellent lubrication properties,
-They are long-life products due to their high oxidation resistance.

Available NLGI grades: 000, 00, 0, 1, 2 and 3.



GRESON L_-T GREASES.PDS.pdf
CUP GREASE SERIES

CUP GREASE SERIES, is calcium soap based, red colored grease, which is used in low load and temperature. These greases provide excellent protection against rust and corrosion and resists water washout that makes them particularly suitable for equipment where moist or wet conditions are common.

The recommended operating temperature range is from -10ºC to 60ºC.

Available NLGI grades: 1, 2 and 3.



CUP GREASE SERIES.PDS.pdf